Eleven kinds of cosmetic packaging materials guaranteed to be non-toxic and safe (below)

9. Trademark, instruction manual, box head sticker and certificate
(1) Printed trademarks should have correct patterns, clear colors, clear and firm writing.
(2) The trademark should be pasted firmly, not skewed, missed, reversed, or wrongly pasted. After being pasted, there should be no corners or edges.
(3) The printed pattern of the manual is neat and the handwriting is clear.
(4) Box head (sticking) printed handwriting and patterns are clear.
(5) The printed handwriting and pattern of the certificate are clear and marked with the name of the factory and the inspector's code.
10. Outer box packaging (including flower box, middle box, large box)
(1) Flower box
① The flower box should be tightly matched with the middle box packaging.
②The flower box should be clean, upright and flat, without wrinkles, edges or corners.
③ The bonding part of the flower box is firmly adhered, there is no paste trace, cracking and mutual adhesion, the color is uniform, which is consistent with the standard sample.
④There is no wrong installation, missing installation and inverted installation. The lid is closed.
⑤ The flower box (including product packaging) of the product should indicate the product's trademark, product name, factory name, factory address, production date (shelf life), capacity or quality, license number, and instructions for use must be provided if necessary.
(2) Middle box
① The middle box should be clean, upright and flat.
②The products are not wrongly installed, missing or inverted.
③ The box head (sticker) shall be correct, clear and complete, and shall bear the marks such as product name, quantity and factory name.
(3) Large box
①The large box should be clean, upright, smooth, and tightly sealed.
②The products are not wrongly installed, missing or inverted.
③ The sign outside the large box should be clear, complete, and in a proper position, and have signs such as product name, factory name, factory address, license number, specifications, quantity, gross weight, volume, factory date, precautions and other signs.
11. Others
(1) Pump-type spray cans shall comply with the corresponding requirements in 6.1-3.
(2) Mark the shelf life of the product. If the quality of the product is more than three years without problems, it can be omitted.
(3) The implemented standard number should be marked on the product or its instruction manual and packaging.

www.sy-jinsheng.com